J-Link ARM Specifications 1、Target voltage can be measured
2、Fully plug-and-play compatible
3、Supports any ARM7/ARM9 core, including thumb mode
4、Powered through USB (<50mA)
5、Full USB 2.0 speed
6、Download speed up to 600 kBytes/s
7、DCC speed up to 800 kb/s
8、Max. JTAG speed 12 MHz
9、Standard 2x10 pin JTAG connector
10、Automatic core recognition
11、Auto speed recognition
12、Support for multiple devices on scan chain
13、Fully plug-and-play compatible
14、All JTAG signals can be monitored
15、Supports 1.2-3.3 V target voltage
Supported ARM Cores:
J-Link has been tested with the following cores, but should work with any
ARM7/ARM9 and Cortex-M3 core.
* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T
* ARM920T
* ARM922T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* Cortex-M3 配件清单： 1、J-LINK仿真器 1 台
2、USB线 1 条
3、20PIN 优质连接线 1条
4、光盘 1张
