用orcad作图，弄好以后netlist，但是在过程中提示error：

WARNING: Name contains illegal characters 'CAPACITOR NON-POL_0', changed to CAPACITOR_NONMINUSPOL_0
WARNING: Name contains illegal characters 'CAP NP', changed to CAP_NP
WARNING: Name contains illegal characters 'CAP POL', changed to CAP_POL
WARNING: Name contains illegal characters 'SW PUSHBUTTON_2', changed to SW_PUSHBUTTON_2
WARNING: Name contains illegal characters 'NC7SZ125/SOT23_3', changed to NC7SZ125BARSOT23_3
WARNING: Name contains illegal characters 'R-NETWORK_1', changed to RMINUSNETWORK_1
WARNING: Name contains illegal characters 'T POINT R', changed to T_POINT_R

诸如此类

都是说需要改名，但是改哪里呢？在图里找不到提示里需要改的零件，作图时有些零件是自己建的，比如第一行里的'CAPACITOR NON-POL_0'，只能在自建的库里找到'CAPACITOR NON-POL'，后缀没有，但是图里没有'CAPACITOR NON-POL_0'这个零件

好像我说得有点麻烦，希望大侠们能看懂，帮帮小弟吧