在编译一段非常基础的PIO控制led的程序时，遇到以下错误提示

**** Incremental build of configuration Debug for project hello_led_0 ****

make -s all
´Ëʱ²»Ó¦ÓÐ "X`which cygpath.exe 2> /dev/null`"¡£
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:152: `: No such file or directory
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:152: "e:/altera/kits/nios2"`: No such file or directory
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:152: /components/altera_hal/build/gnu_rules.mk: No such file or directory
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:156: `: No such file or directory
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:156: "e:/altera/kits/nios2"`: No such file or directory
e:/altera/kits/nios2/components/altera_hal/build/app_rules.mk:156: /components/altera_hal/build/gtf_rules.mk: No such file or directory
make: *** No rule to make target `/components/altera_hal/build/gtf_rules.mk'.  Stop.
Build completed

但把工程文件夹全部复制到另外一台PC上重新编译，则顺利通过

不知道是不是我的软件安装有问题，还是设置有问题

请大家帮我看一下子，谢谢！