电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛

标题: [求助]关于用Cable III配置Spartan3？ [打印本页]

作者: hier 时间: 2006-3-9 17:03 标题: [求助]关于用Cable III配置Spartan3？

哪位大侠用过 Cable III 配置Spartan3 呢？

下面是xilinx主页的说明：
The Parallel Cable III could be powered from 2.5V to 5V; however, it could only interface with 3.3V and 5V logic levels reliably. The 74HC125 buffers in the Parallel Cable III were designed to be powered with a wide VCC range, but were not designed to perform logic level translation. Do not use the Parallel Cable III to configure a part that interfaces at 2.5V levels. If this is required, you must provide your own level-shifter.

说不能进行 2.5V的配置，如果用Cable III，一定要配制成3.3V吗？

这几天在画板，麻烦各位多多指教多谢

作者: bjxiong 时间: 2006-3-10 09:57

呵呵呵，没有弄过，值得关注！！！
哪位老大给讲讲？？

欢迎光临电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛 (http://bbs.eccn.com/)