电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛

标题: 调试Nios2程序时的问题！！-->silverwolf7516转移 [打印本页]

作者: schfwxf 时间: 2006-9-28 11:55 标题: 调试Nios2程序时的问题！！-->silverwolf7516转移

我选择了在仿真模式下调试程序，但在提示信息窗口显示：

Warning : SOPC Builder system component lcd_display is not supported by the simulator. Simulation may be incorrect if your software attempts to access it

Warning : SOPC Builder system component led_pio is not supported by the simulator. Simulation may be incorrect if your software attempts to access it

Warning : SOPC Builder system component button_pio is not supported by the simulator. Simulation may be incorrect if your software attempts to access it

Warning : SOPC Builder system component seven_seg_pio is not supported by the simulator. Simulation may be incorrect if your software attempts to access it

Warning : SOPC Builder system component reconfig_request_pio is not supported by the simulator. Simulation may be incorrect if your software attempts to access it

请问给位大虾这是什么原因啊？谢谢!

作者: mage1982 时间: 2006-10-3 19:04

I/O的功能仿真不了吧
最好买块板子直接调试
国内的板子比较便宜了，几百块而已

作者: kzw 时间: 2006-10-8 08:13

直接硬件调试吧,这样比软件方针更好,更直接.

欢迎光临电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛 (http://bbs.eccn.com/)