电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛

标题: 串口输出信息是这样的，这个是什么问题？硬件有问题吗 [打印本页]

作者: reporter 时间: 2013-9-13 11:11 标题: 串口输出信息是这样的，这个是什么问题？硬件有问题吗

U-Boot 1.1.6 rel-4-3-10 (Dec 13 2011 - 05:11:31) for SMDK2416

CPU:&nbsp; &nbsp;S3C2416@400MHz
&nbsp; &nbsp;&nbsp; &nbsp; Fclk = 800MHz, Hclk = 133MHz, Pclk = 66MHz
Board: SMDK2416 DDR2
DRAM:&nbsp; &nbsp; 64 MB
Flash:&nbsp; &nbsp;0 kB
NAND:&nbsp; &nbsp; 32 MB
SD/MMC:&nbsp;&nbsp;nfconf = 80007774
In:&nbsp; &nbsp;&nbsp; &nbsp;serial
Out:&nbsp; &nbsp;&nbsp;&nbsp;serial
Err:&nbsp; &nbsp;&nbsp;&nbsp;serial
Net:&nbsp; &nbsp;&nbsp;&nbsp;ax88796c
Warning: ax88796c MAC addresses don't match:
Address in SROM is&nbsp; &nbsp;&nbsp; &nbsp;&nbsp; &nbsp;08:00:3E:26:0A:5B
Address in environment is&nbsp;&nbsp;00:40:5C:26:0A:5B

Hit any key to stop autoboot:&nbsp;&nbsp;3

NAND read: device 0 offset 0x1f00000, size 0x4b000
307200 bytes read: OK

NAND read: device 0 offset 0x100000, size 0x200000
2097152 bytes read: OK
Boot with zImage

Starting kernel ...

Uncompressing Linux............................................................

欢迎光临电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛 (http://bbs.eccn.com/)