[Linking...] "C:\CCStudio_v3.1\C2000\cgtools\bin\cl2000" -@"Debug.lkf" <Linking> >> warning: entry point other than _c_int00 specified
Build Complete, 0 Errors, 1 Warnings, 0 Remarks.
在 file\load program掉用Example_280xCpuTimer.out時,系統提示信息,不能調適,運行, 系統提示; Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map. Can't Set Breakpoint at 0x3fa06a: Cannot access memory address 0x3FA06A An error was encountered attempting to set a breakpoint used for end of program detection.
懷疑是TI 的cmd文件在軟件模擬仿真時需要修改 ,請大家指教
MEMORY { PAGE 0 : /* For this example, H0 is split between PAGE 0 and PAGE 1 */ /* BEGIN is used for the "boot to SARAM" bootloader mode */