电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛

标题: 请教关于GR2287 [打印本页]

作者: stone062122 时间: 2004-12-15 13:55

一般来说,sys-test 可以过就行.pre-test的功能很少有人会用到的.

作者: allen_xu 时间: 2004-12-15 13:57 标题: 请教关于GR2287

我这边有台机器是2287-i，我在做自检时，Peripheral System tests
和Instrument System tests全都PASS。但High Speed System Tests偶尔可以全PASS.
但经常会出现以下问题，接下去pin卡的测试也全都FAIL，各路好手请给点建议！
非常感谢！！！

228DIA:2287est00.obc 03-JUN-04  15:21:46
*** High Speed Subsystem Monitor Started Thu Jun 03 15:31:04 2004 ***
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.。。。。
Fail :HSC
      * Actual: 0xffffffff
      * Expected: 0
      * Address: 0x100
FAILED - RESULT MEMORY should have read a zero!
      * Actual: 0xffffffff
      * Expected: 0
      * Address: 0x101
FAILED - RESULT MEMORY should have read a zero!
      * Actual: 0xffffffff
      * Expected: 0
      * Address: 0x102
FAILED - RESULT MEMORY should have read a zero!
      * Actual: 0xffffffff
      * Expected: 0
      * Address: 0x103
。。。

作者: stone062122 时间: 2004-12-15 13:57

你进diagnose模式做High Speed System Tests自检,将自检报告发给我看看.
nicholas_lp@163.com

欢迎光临电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛 (http://bbs.eccn.com/)