标题: CW3.1连接时出现L1102：out of allocation space in segment ROM_C000 at address [打印本页]
作者: caoyibb 时间: 2006-12-5 14:19 标题: CW3.1连接时出现L1102：out of allocation space in segment ROM_C000 at address
版主好！大家好！我在使用DG128时候，链接出现L1102：out of allocation space in segment ROM_C000 at address 0xFEFF 的错误，我程序到了48K以上时出现的，我试着加#pragma CODE_SEG OTHER_ROM ,但无效，可能位置加错了。请问如何解决呢？
作者: strongchen 时间: 2006-12-5 14:32
要和PRM文件配合。你在PRM文件里面设置OTHER_ROM的地址了吗？
作者: caoyibb 时间: 2006-12-5 14:37
是这段吗？谢谢！
SEGMENTS
RAM = READ_WRITE 0x2000 TO 0x3FFF;
/* unbanked FLASH ROM */
ROM_4000 = READ_ONLY 0x4000 TO 0x7FFF;
ROM_C000 = READ_ONLY 0xC000 TO 0xFEFF;
/* banked FLASH ROM */
PAGE_38 = READ_ONLY 0x388000 TO 0x38BFFF;
PAGE_39 = READ_ONLY 0x398000 TO 0x39BFFF;
PAGE_3A = READ_ONLY 0x3A8000 TO 0x3ABFFF;
PAGE_3B = READ_ONLY 0x3B8000 TO 0x3BBFFF;
PAGE_3C = READ_ONLY 0x3C8000 TO 0x3CBFFF;
PAGE_3D = READ_ONLY 0x3D8000 TO 0x3DBFFF;
/* PAGE_3E = READ_ONLY 0x3E8000 TO 0x3EBFFF; not used: equivalent to ROM_4000 */
/* PAGE_3F = READ_ONLY 0x3F8000 TO 0x3FBFFF; not used: equivalent to ROM_C000 */
END
作者: caoyibb 时间: 2006-12-5 15:54
如何设置OTHER_ROM的地址，能给个例子吗？谢谢！
作者: strongchen 时间: 2006-12-5 16:24
你在建project时选择的是什么memory模式？是small模式吗？如果是，那在PRM文件中已经定义了OTHER_ROM的地址，如下:
/* This is a linker parameter file for the MC9S12DB128 */
NAMES END /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your own files too. */
SEGMENTS /* here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */
RAM = READ_WRITE 0x0400 TO 0x1FFF;
/* unbanked FLASH ROM */
ROM_4000 = READ_ONLY 0x4000 TO 0x7FFF;
ROM_C000 = READ_ONLY 0xC000 TO 0xFEFF;
/* banked FLASH ROM */
PAGE_38 = READ_ONLY 0x388000 TO 0x38BFFF;
PAGE_39 = READ_ONLY 0x398000 TO 0x39BFFF;
PAGE_3A = READ_ONLY 0x3A8000 TO 0x3ABFFF;
PAGE_3B = READ_ONLY 0x3B8000 TO 0x3BBFFF;
PAGE_3C = READ_ONLY 0x3C8000 TO 0x3CBFFF;
PAGE_3D = READ_ONLY 0x3D8000 TO 0x3DBFFF;
/* PAGE_3E = READ_ONLY 0x3E8000 TO 0x3EBFFF; not used: equivalent to ROM_4000 */
/* PAGE_3F = READ_ONLY 0x3F8000 TO 0x3FBFFF; not used: equivalent to ROM_C000 */
END
PLACEMENT /* here all predefined and user segments are placed into the SEGMENTS defined above. */
_PRESTART, /* Used in HIWARE format: jump to _Startup at the code start */
STARTUP, /* startup data structures */
ROM_VAR, /* constant variables */
STRINGS, /* string literals */
VIRTUAL_TABLE_SEGMENT, /* C++ virtual table segment */
//.ostext, /* OSEK */
DEFAULT_ROM, NON_BANKED, /* runtime routines which must not be banked */
COPY /* copy down information: how to initialize variables */
/* in case you want to use ROM_4000 here as well, make sure
that all files (incl. library files) are compiled with the
option: -OnB=b */
INTO ROM_C000/*, ROM_4000*/;
OTHER_ROM INTO PAGE_38,PAGE_39,PAGE_3A,PAGE_3B,PAGE_3C,PAGE_3D;
//.stackstart, /* eventually used for OSEK kernel awareness: Main-Stack Start */
SSTACK, /* allocate stack first to avoid overwriting variables on overflow */
//.stackend, /* eventually used for OSEK kernel awareness: Main-Stack End */
DEFAULT_RAM INTO RAM;
//.vectors INTO OSVECTORS; /* OSEK */
END
ENTRIES /* keep the following unreferenced variables */
/* OSEK: always allocate the vector table and all dependent objects */
//_vectab OsBuildNumber _OsOrtiStackStart _OsOrtiStart
END
STACKSIZE 0x100
VECTOR 0 _Startup /* reset vector: this is the default entry point for a C/C++ application. */
//VECTOR 0 Entry /* reset vector: this is the default entry point for an Assembly application. */
//INIT Entry /* for assembly applications: that this is as well the initialization entry point */
[此贴子已经被strongchen于2006-12-5 16:24:51编辑过]
作者: caoyibb 时间: 2006-12-5 16:53
我用的是bank模式呀，#pragma CODE_SEG OTHER_ROM 应该加在哪呢？谢谢！
作者: strongchen 时间: 2006-12-5 17:13
如果你用的是BANKED模式，那DEFAULT的地址应该是在分页地址中，不应该出现溢出的情形。把你的project发给我看看吧：strongchen_free@yahoo.com.cn。
作者: caoyibb 时间: 2006-12-5 17:23
我改了一下：
OTHER_ROM INTO PAGE_38,PAGE_39,PAGE_3A;
OTH2_ROM INTO PAGE_3B,PAGE_3C,PAGE_3D;
然后把一些字模、表格前加了 #pragma CONST_SEG OTH2_ROM，现在又通过了，不知以后还会不会有问题。谢谢！
作者: caoyibb 时间: 2006-12-5 20:59
链接通过了，但运行总不对
作者: caoyibb 时间: 2006-12-6 00:09
又改了一下：
DEFAULT_ROM INTO PAGE_38,PAGE_39,PAGE_3A,PAGE_3B,PAGE_3C,PAGE_3D;
OTH1_ROM INTO ROM_4000;
然后把一些字模、表格前加了 #pragma CONST_SEG OTH1_ROM，现在运行是正确的
| 欢迎光临 电子技术论坛_中国专业的电子工程师学习交流社区-中电网技术论坛 (http://bbs.eccn.com/) |
Powered by Discuz! 7.0.0 |