请教大家：

我的板子上用的芯片是MC9S12DP512，但P&E BDM-multilink无法下载程序。只能硬件仿真。察看codewarrior的command窗口，有一段似乎异常：

MCU clock speed: 1544000 Hz
Block Module Name Address Range Status
0 EEPROM 1000 - 17FF Blank - Unselected
1 FLASH_4000 4000 - 7FFF Blank - Unselected
2 FLASH_C000 C000 - FFFF Programmed - Unselected
3 PAGED 3C8000 -3FBFFF Programmed - Unselected

The UNPROTECT command is not available for the EEPROM flash module => Skipped.

The UNPROTECT command is not available for the FLASH_4000 flash module => Skipped.

The UNPROTECT command is not available for the FLASH_C000 flash module => Skipped.

The UNPROTECT command is not available for the PAGED flash module => Skipped.

不知为何跳过以上的命令，是否由此导致下载不成功？