首页 | 新闻 | 新品 | 文库 | 方案 | 视频 | 下载 | 商城 | 开发板 | 数据中心 | 座谈新版 | 培训 | 工具 | 博客 | 论坛 | 百科 | GEC | 活动 | 主题月 | 电子展
返回列表 回复 发帖

ETA1061替代PC8609D超低功耗具备1uA的工作电流,具备EN真关断技术

ETA1061替代PC8609D超低功耗具备1uA的工作电流,具备EN真关断技术

The PC8609 is a synchronousstep-up converter
with 0.65
μA ultra low quiescent current. It is designed
for products powered by alkaline battery, NiMH
rechargeable battery, Li-Mn battery or rechargeable
Li-Ion battery, for which high efficiency under light load
condition is critical to achieve long battery life
operation.
The
PC8609 step-up converter only consumes
0.65
μA quiescentcurrent under light load condition and
can
achieve up to 75% efficiencyat 10μA load with
fixed output voltage version. It can also support up to
300mA output current from3.3V to 5V conversion, and
achieve up to 93% efficiency at 200mA load.
The PC8609 also offers both downmode
andpass-through operation for different applications.In
down mode, the output voltage can still be regulated at
target value even when input voltage is higher than
output voltage. In pass-through mode, the output
voltage follows input voltage. The
PC8609 exits
down mode and enters into pass-through mode when
VIN > VOUT + 0.3V.
The PC8609 supports true shutdownfunction when it
is disabled, which disconnects the load from the input
supply to reduce the current consumption. The
PC8609 offers both adjustable output voltageversion
and fixed output voltage versions. It is available
in Green WLCSP-1.22×0.83-6B and TDFN-2×2-
6AL
packages.

PC8609低功耗升压芯片.pdf (1.57 MB)

返回列表