[求助]请教一下，如何用PE在56f8013VFAE中检测中断 检测, 请教, 求助

dqff1982

本人刚刚接触这方面的知识，请各位高手们尽可能的说的详细一些，谢谢了。

usliwu

先在PE的介面中将相关接口的中断enable，然后用PE产生code ( Generate Code),这时PE就产生另一个Ｃ文件 "Events.c", 中断的skeleton就在这个文件中，下面就是一个PWM故障中断1的例子. 这个function 就是ＰＥ产生在"Events.c" 中。 /* ** =================================================================== ** Event : PWMC1_OnFault0 (module Events) ** ** From bean : PWMC1 [PWMMC] ** Description : ** This event is called when fault 0 occurs. (only when the ** bean is enabled - and the events are enabled - ** ). (event is available only if interrupt ** service/event is enabled). The event clears Fault flag ** only when the Fault is set to manual clearing mode. When ** the Fault is set to the automatic clearing mode, the ** Fault flag must be cleared by the user using ** ClearFaultFlag() method. ** Parameters : None ** Returns : Nothing ** =================================================================== */ #pragma interrupt called /* Comment this line if the appropriate 'Interrupt preserve registers' property */ /* is set to 'yes' (#pragma interrupt saveall is generated before the ISR) */ void PWMC1_OnFault0(void) { /* Write your code here ... */ }