power PCB铺铜时遇到的问题，请高人指点迷津~~~

PCB, power, 高人, 指点迷津

THERMAL RELIEF ERRORS REPORT -- 000.pcb -- Mon Sep 26 23:04:31 2005

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 50% thermal extensions

Report of Thermal Spokes Generator.

On Top:
      (6430, 5350) # = 0
      (5750, 5325) # = 0
      (7010, 5250) # = 1
      (6610, 5180) # = 0
      (7360, 5110) # = 1
      (7000, 5775) # = 1
      (3070, 6550) # = 1
      (3070, 6110) # = 1
      (4400, 6290) # = 1
      (4400, 6260) # = 1
      (4400, 6125) # = 0
      (4710, 5290) # = 0
      (5530, 6600) # = 1
      (5280, 6600) # = 0
      (5690, 6300) # = 0
      (5710, 6250) # = 1
      (5710, 6110) # = 1
      (5710, 6000) # = 1
      (5710, 5860) # = 1
      (5710, 5680) # = 1
      (4400, 5470) # = 1
      (4400, 5510) # = 1
      (4400, 5690) # = 0
      (4400, 5860) # = 1
      (4400, 5900) # = 1
      (4400, 6000) # = 0
      (3450, 6050) # = 0
      (2900, 5500) # = 0
      (2750, 5410) # = 0
      (3175, 4875) # = 1

Total Drilled pads: 30             Total Nondrilled pads: 0

Report of Violating Thermal Spokes Remover.

On Top:
      (7010, 5250) # = 0
      (3050, 5030) # = 0

Total Drilled pads: 2             Total Nondrilled pads: 0
请问以上错误问题出在什么地方呀？？

收藏分享评分

回复引用

订阅 TOP