[求助]flash flash, 求助

haneryu

选择flash为program memory时，调试时console栏里说 verify failed between address 0x00 and 0x29B 这是怎么回事？

kzw

console的代码不能放到flash中，要放到ram中的。

bjxiong

嗯，楼上的说得对

haneryu

放到ram里能跑，用flash programmer 烧写时，报错如下Launch aborted - project (or dependency) failed to build. See C-Build console for details
下面是console里面的东西
**** Incremental build of configuration Debug for project hello_led_0 ****

make -s all
make: *** [E:/software/demo2/software/hello_led_0_syslib/Debug/system_description/system.h] File does not exist.
make: *** [E:/software/demo2/software/hello_led_0_syslib/Debug/system_description/system.h] The project may contain an out of date dependency file.
make: *** [E:/software/demo2/software/hello_led_0_syslib/Debug/system_description/system.h] Try 'Clean...' from the Project menu for project hello_led_0.
make: *** [E:/software/demo2/software/hello_led_0_syslib/Debug/system_description/system.h] Error 1
Build completed
这是怎么回事呀？

meling

重新编译一下工程，更新一下相应的文件

kzw

恩，重新编译一次。

haneryu

那个编译的问题没了，但在烧写时有错，CFI erase region definitions don't match device size，然后就停止了 这是怎么回事呀？我用的flash是 SST39VF1601

kzw

你的flash的空间的大小不对.