|
- UID
- 1023229
- 来自
- 中国
|
使用FPGA实现各种算法时，状态机是很常用的方法，在SysGen中有两种非常简便的方法构建状态机，一是使用Mcode，以switch-case语句轻松实现，二是使用SysGen自带状态机模块。
状态机
假设我们要从01序列中检测出1011序列，则状态机模型如下
Next State Matrix：[0 1; 2 1; 0 3; 2 1]
Output Matrix ： [0 0; 0 0; 0 0; 0 1]
一、使用Mcode实现
上一篇博客讲解了在Sysgen中Mcode的限制能力，这里直接使用构建模型如下：
Singal From Workspace用于产生一个01序列，作为输入信号。
gatwayIn将数据类型转化为UFix_1_0
添加Mcode函数stateMcode.m
<span style="font-size:24px;">function [nextState, matched] = stateMcode(currentState, din)
% This is the update function for detecting a pattern of 1011
% This function represents a stateless and combination logic block.
% The output nextState should be to a register, and the output
% of the register should be fed back to the input currentState.
% Because the state register block has a feed back connection, in
% order to propagate the port prototypes automatically, the prototype
% of nextState should be determined only by constants or through
% an explicity xfix() call.
seen_none = 0; % initial state, if input is 1, switch to seen_1
seen_1 = 1; % first 1 has been seen, if input is 0, switch
% seen_10
seen_10 = 2; % 10 has been detected, if input is 1, switch to
% seen_1011
seen_101 = 3; % now 101 is detected, is input is 1, 1011 is
% detected and the FSM switches to seen_1
% the default value of matched is false
matched = false;
switch currentState
case seen_none
if din==1
nextState = seen_1;
else
nextState = seen_10;
end
case seen_1 % seen first 1
if din==1
nextState = seen_1;
else
nextState = seen_10;
end
case seen_10 % seen 10
if din==1
nextState = seen_101;
else
% no part of sequence seen, go to seen_none
nextState = seen_none;
end
case seen_101
if din==1
nextState = seen_1;
matched = true;
else
nextState = seen_10;
matched = false;
end
otherwise
% if nextState is not assigned outside the switch statement,
% an otherwise statment is required
nextState = seen_none;
end
</span>
Scope效果如图：
二、使用Mealy State Machine模块实现构建模型：
设置Mealy State Machine参数，就是状态机的参数
仿真结果如下：
在进行FPGA图像处理时，经常会用到状态机，这几天刚学习过，记录一下，其实使用Verilog直接实现也不是很难，只是会比SysGen稍微麻烦一些，修改起来也会花费更多的时间。
Model Based Design 在Xilinx 的工具中逐渐得到加强，相信以后会更加的方便。
来源：机器视觉的博客 |
|
