System Generator 安裝

Generator, 安裝, System

Hi all: 我在安裝System Generator時,出現了各問題, 安裝一開始就跳出此訊息: There does not appear to be a supported version of Matlab installed on your system. If Matlab is installed,
try setting the MATLAB environment variable to point ot the installation
direction. 我Matlab已經裝好, version 7.1. 用時也很正常,請問世發生了什麼事情呢?

收藏分享评分

回复引用

订阅 TOP

注册会员

Rank: 2

UID: 154608
性别: 男

2^#

bluekidds发表于 2007-3-6 19:50 | 只看该作者

感謝!!我重灌matlab以後已經克服這個問題. 現在正在試驗如何用system generator這個好工具. 歡迎同好一起研究!!

回复引用

TOP

注册会员

Rank: 2

UID: 151851
性别: 男

3^#

job3001发表于 2007-5-17 16:17 | 只看该作者

能否给我发个sysgen啊，job3001@126.com thanks

回复引用

TOP

注册会员

Rank: 2

UID: 156818
性别: 男

4^#

machinecat-007发表于 2007-5-18 20:31 | 只看该作者

你们用 sysgen 生成 netlist 的时候有没有出现过如下问题啊？：

Begin generation Checking model status Checking simulation times Performing compilation and generation

*** ERROR ***

Errors occurred during netlist generation.
Error using ==> sim
Error reported by S-function 'sysgen' in 'adder_saturate/Gateway In':

Summary of errors from all sources:

(NOTE: None of the errors were associated with a particular block;
the block reporting this summary was chosen at random.)

--------------------------------------------------------------------------
Summary of Errors:
Error 0001: caught standard exception
Block: Unspecified
--------------------------------------------------------------------------

Error 0001:

Reported by:
Unspecified

Details:
standard exception: XNetlistEngine:
An exception was raised:
com.xilinx.sysgen.netlist.NetlistInternal: couldn't make clock
wrapper at
D:/MATLAB/R2006a/toolbox/xilinx/sysgen/scripts/SgPass2Netlist.pm
line 107.

--------------------------------------------------------------------------.