大家您好！我是新学nios的！在flash programmer遇到下面的问题，就是解决不了！不知可有哪位大侠遇到过同样的问题给小弟一点建议！谢谢！ #!/bin/sh
#
# This file was automatically generated by the Nios II IDE Flash Programmer.
#
# It will be overwritten when the flash programmer options change.
#
cd F:/zncore/zd/Debug
# Creating .flash file for the project
"$SOPC_KIT_NIOS2/bin/elf2flash" --base=0x00000000 --end=0x3ffff --reset=0x0 --in
put="zd.elf" --output="flash.flash" --boot="C:/altera/61/ip/nios2_ip/altera_nios
2/boot_loader_cfi.srec"
# Programming flash with the project
"$SOPC_KIT_NIOS2/bin/nios2-flash-programmer" --base=0x00000000 "flash.flash"
Using cable "ByteBlasterII [LPT1]", device 1, instance 0x00
Resetting and pausing target processor: No CFI table found at address 0x00000000
CFI erase region definitions don't match device size
OK
Leaving target processor paused
| 
