我这边有台机器是2287-i， 我在做自检时，Peripheral System tests
和Instrument System tests全都PASS。但High Speed System Tests偶尔可以全PASS.
但经常会出现以下问题，接下去pin卡的测试也全都FAIL，各路好手请给点建议！
非常感谢！！！
228DIA:2287est00.obc 03-JUN-04 15:21:46
*** High Speed Subsystem Monitor Started Thu Jun 03 15:31:04 2004 ***
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Result address test, Result memory data is incorrect.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.
FAILED - Pin board #1 result memory.。。。。
Fail :HSC
* Actual: 0xffffffff
* Expected: 0
* Address: 0x100
FAILED - RESULT MEMORY should have read a zero!
* Actual: 0xffffffff
* Expected: 0
* Address: 0x101
FAILED - RESULT MEMORY should have read a zero!
* Actual: 0xffffffff
* Expected: 0
* Address: 0x102
FAILED - RESULT MEMORY should have read a zero!
* Actual: 0xffffffff
* Expected: 0
* Address: 0x103
。。。 |
