[求助] Flash Programmer Usage Problem Programmer, Usage, Flash, Problem, 求助

altonchan

During running flash programmer:

#! /bin/sh
#
# This file was automatically generated by the Nios II IDE Flash Programmer.
#
# It will be overwritten when the flash programmer options change.
#

cd C:/altera/kits/nios2_60/bin/eclipse/workspace/Project/DE2_Board_new/DE2_Board
/system/software/count_binary_0/Debug

# Creating .flash file for the project
$SOPC_KIT_NIOS2/bin/elf2flash --base=0x0040D800 --end=0x40d807 --reset=0x40c000
--input=count_binary_0.elf --output=asmi.flash --boot=$SOPC_KIT_NIOS2/components
/altera_nios2/boot_loader_cfi.srec

# Programming flash with the project
$SOPC_KIT_NIOS2/bin/nios2-flash-programmer --sidp=0x0040D838 --id=2273877087 --t
imestamp=1165198630 --base=0x0040D800 asmi.flash
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Resetting and pausing target processor: OK
Reading System ID at address 0x0040D838: No CFI table found at address 0x0040D80
0
verified
Leaving target processor paused

# Creating .flash file for the project
$SOPC_KIT_NIOS2/bin/elf2flash --base=0x00000000 --end=0x3fffff --reset=0x40c000
--input=count_binary_0.elf --output=cfi_flash_0.flash --boot=$SOPC_KIT_NIOS2/com
ponents/altera_nios2/boot_loader_cfi.srec

# Programming flash with the project
$SOPC_KIT_NIOS2/bin/nios2-flash-programmer --sidp=0x0040D838 --id=2273877087 --t
imestamp=1165198630 --base=0x00000000 cfi_flash_0.flash
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Resetting and pausing target processor: OK
Reading System ID at address 0x0040D838: verified
Leaving target processor paused


What's wrong of my system ? (Some words output in console is in red)
It seems the program terminated abnormally ...

Please help

kzw

it seams that you could not connect to the target.

can you download codes in console mode.

altonchan

It is the same in console mode .... fail

kzw

you use DE2??

altonchan

Yes, I am using DE2

kzw

you use the example of DE2, can success??

if failed, there is something wrong with your board.