seuafu2005

SEGMENTS /* Here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */
ROM = READ_ONLY 0xF000 TO 0xFBFF;
FLASH_PRO_ROM = READ_ONLY
Z_RAM = READ_WRITE 0x0060 TO 0x00FF;
RAM = READ_WRITE 0x0100 TO 0x015F;
ROM1 = READ_ONLY 0xFFC0 TO 0xFFCF;
END

你的prm文件中间出现的红色标注的应该不是默认生成的