求助：NIOS IDE,RUN AS HARDWARE IDE, HARDWARE, RUN, NIOS, 求助

pangjibo2008

做的是简单的hello_led,BUILD 通过了

用的是Quartus7.1

Cyclone EP1C61C208

出现以下问题：望做过的同行指点迷津

Using cable "ByteBlasterII [LPT1]", device 1, instance 0x00
Pausing target processor: not responding.
Resetting and trying again: FAILED
Leaving target processor paused

是CPU设错了，还是c语言的问题？

pangjibo2008

刚才又做了一下，实现将NIOS下载到EP1C6中，复位键接高电平

Warning: trying to use little-endian srec with big-endian hardware
Using cable "ByteBlasterII [LPT1]", device 1, instance 0x00
Pausing target processor: not responding.
Resetting and trying again: FAILED
Leaving target processor paused